Although the automatic bottle blowing machine has many advantages, you should know that there are also many things to pay attention to when operating it, because most people are not very clear, so the next section will introduce what we need to pay attention to when using it. If you want to know, please come and have a look. I hope it can help you.
The full-automatic bottle blowing machine is also a large equipment. If you do not understand it, do not operate it. Before use, the staff should first check whether there is water and oil in the electrical control box. If the electrical appliances are damp, do not start the machine. The maintenance personnel should blow the electrical parts dry before starting the machine. Then check whether the electrical voltage of wide mouth bottle blowing machine conforms to the standard, which should not be greater than ± 15% in general. For its emergency stop switch, the front and rear safety door switches should also be checked. In addition, verify whether the rotation direction of motor and oil pump is consistent. Check whether all cooling pipes are unblocked, and feed cooling water into the oil cooler and the cooling water jacket at the end of the barrel. Whether there is lubricating oil (grease) at all moving parts, and add enough lubricating oil. After turning on the electric heating, heat up each section of the barrel. When the temperature of each section meets the requirements, keep it warm for a period of time to stabilize the machine temperature. The heat preservation time depends on different equipment and metal. These are the things to do before using the wide mouth bottle blowing machine, and they are also some places that must be checked. If you find any problems, you must stop using the machine immediately.
In addition, we also need to know some matters that should be paid attention to during the operation. When using the full-automatic wide mouth bottle blowing machine, the staff should pay attention not to cancel the function of the safety door for convenience. It is also necessary to observe the temperature of the pressure oil, and the oil temperature shall not be greater than the specified range. The ideal working temperature of hydraulic oil should be kept between 45~50 ℃, generally within the range of 35~60 ℃. Pay attention to the adjustment of each travel limit switch to avoid the impact of the machine during operation. This is the point to pay attention to after the operation of the wide mouth bottle blowing machine. After use, the metal in the barrel shall be cleaned to prevent the residual material from oxidation or long-term thermal decomposition. It is also necessary to open the mold to keep the toggle mechanism locked for a long time. The workshop is equipped with lifting equipment. Be very careful when assembling and disassembling heavy parts such as molds to ensure production safety. As long as you read this article carefully, there will be no problems in the future. In this way, the service life of the wide mouth bottle blowing machine can be extended. If you don't understand something, please feel free to consult us.
To sum up, you will find that there are many things to pay attention to when using the full-automatic bottle blowing machine. After all, it is a large-scale equipment, and every place needs to be checked and noticed. As long as we do this, we can use it for a longer time. As a professional manufacturer, we are here to welcome you to call us for relevant questions.